Lab JN0-481 Questions & JN0-481 Visual Cert Exam

During the process of using our JN0-481 study materials, you focus yourself on the exam bank within the given time, and we will refer to the real exam time to set your JN0-481 practice time, which will make you feel the actual exam environment and build up confidence. Not only that you can get to know the real questins and answers of the JN0-481 Exam, but also you can adjust yourself to the real pace of the JN0-481 exam.

Another great way to assess readiness is the Juniper JN0-481 web-based practice test. This is one of the trusted online Juniper JN0-481 prep materials to strengthen your concepts. All specs of the desktop software are present in the web-based Juniper JN0-481 Practice Exam.

>> Lab JN0-481 Questions <<

JN0-481 Visual Cert Exam - Cheap JN0-481 Dumps

It is really a tough work to getting JN0-481 certification in their spare time because preparing actual exam dumps needs plenty time and energy. As the one of certification exam dumps provider, Actual4dump enjoys a high popularity for its profession of JN0-481 Exam Dumps and training materials. You will get high passing score in test with the help of our JN0-481 braindumps torrent.

Juniper Data Center, Specialist (JNCIS-DC) Sample Questions (Q25-Q30):

NEW QUESTION # 25
You connect two single-homed servers using Juniper Apstra as shown in the exhibit. You are using the ERB design blueprint with two virtual networks in a common routing zone. In this scenario, which two types of VXLAN tunnels will be automatically created by the EVPN control plane? (Choose two.)

A. EVPN signaled route Type-8 VXLAN tunnels
B. EVPN signaled route Type-6 VXLAN tunnels
C. EVPN signaled route Type-3 VXLAN tunnels
D. EVPN signaled route Type-2 VXLAN tunnels

Answer: C,D

Explanation:
EVPN route Type-3 is used to advertise the IP address of the VTEP and the VNIs that it supports.
This allows the VTEPs to discover each other and form VXLAN tunnels for the VNIs that they have in common. EVPN route Type-2 is used to advertise the MAC and IP addresses of the hosts connected to the VTEPs. This allows the VTEPs to learn the MAC-to-IP bindings and the MAC-to- VTEP mappings for the hosts in the same VNI. Therefore, these two types of VXLAN tunnels will be automatically created by the EVPN control plane when using Juniper Apstra with the ERB design blueprint and two virtual networks in a common routing zone.

NEW QUESTION # 26
You are adding a new switch to Juniper Apstra software. The Managed Devices page shows the
"0 OS- Quarantined" status. What is the proper next step to make the device ready for use in a blueprint?

A. Install the agent for the device.
B. Take the device out of maintenance mode.
C. Acknowledge the device.
D. Take the device out of drain state.

Answer: C

Explanation:
When a new switch is added to Juniper Apstra software, it initially shows the "0 OS-Quarantined" status, which means that the device is not yet managed by Apstra and has not been assigned to any blueprint. The proper next step to make the device ready for use in a blueprint is to acknowledge the device, which is a manual action that confirms the device identity and ownership. Acknowledging the device changes its status to "OOS-Ready", which means that the device is ready to be assigned to a blueprint and deployed.

NEW QUESTION # 27
You are working to build an ESI-LAG for a multihomed server. The ESI-LAG is not coming up as multihomed.
Referring to the exhibit, what are two solutions to this problem? (Choose two.)

A. The ESI ID on both devices must be the same.
B. The loopback IP addresses on both devices must be the same.
C. The LACP system ID on both devices must be the same.
D. The gateway IP addresses on both devices must be different.

Answer: A,C

Explanation:
An ESI-LAG is a link aggregation group (LAG) that spans two or more devices and is identified by an Ethernet segment identifier (ESI). An ESI-LAG provides redundancy and load balancing for a multihomed server in an EVPN-VXLAN network. To configure an ESI-LAG, you need to ensure that the following requirements are met:
The LACP system ID on both devices must be the same. This ensures that the LACP protocol can negotiate the LAG parameters and form a single logical interface for the server.
The ESI ID on both devices must be the same. This ensures that the EVPN control plane can advertise the ESI-LAG as a single Ethernet segment and synchronize the MAC and IP addresses of the server across the devices.
The VLAN ID and VNI on both devices must be the same. This ensures that the server can communicate with other hosts in the same virtual network and that the VXLAN encapsulation and decapsulation can work properly.
In the exhibit, the LACP system ID and the ESI ID on both devices are different, which prevents the ESI-LAG from coming up as multihomed. Therefore, the correct answer is B and D. The LACP system ID on both devices must be the same and the ESI ID on both devices must be the same.

NEW QUESTION # 28
Which two statements are correct regarding a pristine configuration in Juniper Apstra? (Choose two.)

A. It Is the configuration file on a device before acknowledgment in Apstra.
B. It is the configuration file placed on the device when decommissioning the device.
C. It is the device's currently active configuration.
D. It is the device's previously active configuration.

Answer: A,B

Explanation:
A pristine configuration in Juniper Apstra is the configuration file that is used to onboard a device into the Apstra software application. A pristine configuration contains the minimum settings that are required for the device to communicate with the Apstra server, such as the hostname, management IP address, username, password, and SSH key. A pristine configuration has the following characteristics:
It is the configuration file placed on the device when decommissioning the device. This is because when a device is decommissioned from the Apstra software application, it is reverted back to its pristine configuration, which removes all the network configuration and services that were applied by the Apstra software application. This allows the device to be reused or repurposed for another network.
It is the configuration file on a device before acknowledgment in Apstra. This is because when a device is onboarded into the Apstra software application, it is initially in the discovery state, which means that the device is discovered by the Apstra server, but not yet acknowledged by the user.
In the discovery state, the device has the pristine configuration, which can be viewed and edited by the user. Once the user acknowledges the device, the device moves to the deployed state, which means that the device is ready to receive the network configuration and services from the Apstra software application.

NEW QUESTION # 29
You must configure a static route for traffic to exit a configured routing zone. In the Juniper Apstra Ul, where would you accomplish this task?

A. under Staged -> Virtual -> Routing Zones
B. under Staged -> Connectivity Templates
C. under Active -> Connectivity Templates
D. under Active -> Virtual -> Routing Zones

Answer: B

Explanation:
To configure a static route for traffic to exit a configured routing zone, you need to use the Connectivity Templates feature in the Juniper Apstra UI. A Connectivity Template is a set of configuration parameters that can be applied to a device or a group of devices in a blueprint. You can use Connectivity Templates to configure static routes, BGP, OSPF, and other network services. To create a Connectivity Template, you need to go to the Staged tab and select Connectivity Templates from the left menu. Then, you can click on the + icon to create a new template. You can specify the name, description, and scope of the template. The scope determines which devices or device groups the template will be applied to. You can also specify the order of the template, which determines the priority of the template when multiple templates are applied to the same device. After creating the template, you can add configuration items to the template. To add a static route, you need to select Static Route from the drop-down menu and enter the destination network, subnet mask, and next- hop IP address. You can also specify the administrative distance and the track object for the static route. After adding the configuration items, you need to save the template and commit the changes to the blueprint.

NEW QUESTION # 30
......

Our JN0-481 learning materials are famous for high quality, and we have the experienced experts to compile and verify JN0-481 exam dumps, the correctness and the quality can be guaranteed. JN0-481 learning materials contain both questions and answers, and you can have a quickly check after you finish practicing. Moreover, we offer you free update for one year, and you can know the latest information about the JN0-481 Exam Materials if you choose us. The update version will be sent to your email automatically.

JN0-481 Visual Cert Exam: https://www.actual4dump.com/Juniper/JN0-481-actualtests-dumps.html

Also, the JN0-481 study guide is always popular in the market, Juniper Lab JN0-481 Questions On the other hand, the online version has a timed and simulated exam function, Juniper Lab JN0-481 Questions We offer support from customer service agent at any time, Juniper Lab JN0-481 Questions You will receive your exam dumps in some minutes after you make payment, Juniper Lab JN0-481 Questions Or nothing is going to happen.

In this case the Source Space will be the name of that custom profile and the Print Space will be Same as Source, Firstly, we have free trials of the JN0-481 Exam study materials to help you know our products.

100% Pass Juniper - JN0-481 - Data Center, Specialist (JNCIS-DC) –Valid Lab Questions

Also, the JN0-481 study guide is always popular in the market, On the other hand, the online version has a timed and simulated exam function, We offer support from customer service agent at any time.

You will receive your exam dumps in JN0-481 some minutes after you make payment, Or nothing is going to happen.